Rather have a pro do it for you?
| Tools and Supplies to Replace a Toilet Tank Flush Valve | ||||
|---|---|---|---|---|
| 1 | Adjustable wrench | |||
| 2 | Channel-lock pliers | |||
| 3 | Screwdriver (flathead or Phillips depending on the type of screws) | |||
| 4 | Putty knife | |||
| 5 | Towels or rags | |||
| 6 | Bucket or container | |||
| 7 | Replacement flush valve kit (including gasket, bolts, and nuts) | |||
How to Replace a Toilet Tank Flush Valve
DIY Guide: Easy Steps to Replace Your Toilet Tank Flush Valve
Replacing a toilet tank flush valve may seem like a daunting task, but with the right tools and a little bit of know-how, it can be done in just a few simple steps. Here's a step-by-step guide on how to replace a toilet tank flush valve:
Step 1: Turn off the water supply
Before you begin, make sure to turn off the water supply to the toilet. This can usually be done by turning the valve located behind the toilet clockwise until it stops.
Step 2: Drain the tank
Next, you'll need to drain the water from the toilet tank. To do this, simply flush the toilet and hold down the handle until all the water has drained out.
Step 3: Disconnect the water supply line
Once the tank is empty, disconnect the water supply line from the bottom of the tank. You can do this by loosening the nut that connects the line to the tank with a pair of pliers.
Step 4: Remove the old flush valve
Now it's time to remove the old flush valve. To do this, unscrew the nut that holds the valve in place and lift it out of the tank. If the valve is stuck, you may need to use a pair of pliers to loosen it.
Step 5: Install the new flush valve
With the old valve removed, it's time to install the new one. Simply insert the new valve into the hole in the bottom of the tank and tighten the nut to hold it in place.
Step 6: Reconnect the water supply line
Once the new valve is in place, it's time to reconnect the water supply line. Simply screw the nut back onto the bottom of the tank and tighten it with a pair of pliers.
Step 7: Turn on the water supply
Finally, turn the water supply back on by turning the valve behind the toilet counterclockwise until it's fully open. You should hear water flowing into the tank.
Step 8: Test the new valve
Once the tank is full, flush the toilet to test the new valve. If everything is working properly, the toilet should flush normally and the tank should refill without any leaks.
And that's it! With these simple steps, you can easily replace a toilet tank flush valve and keep your toilet running smoothly.
