Rather have a pro do it for you?
| Tools and Supplies to Fit a Toilet Seat and Lid | ||||
|---|---|---|---|---|
| 1 | Adjustable wrench | |||
| 2 | Screwdriver (flathead or Phillips) | |||
| 3 | Pliers | |||
| 4 | Tape measure | |||
| 5 | Pen or pencil (for marking) | |||
| 6 | Safety goggles | |||
| 7 | Gloves | |||
| 8 | Toilet seat and lid (if not already provided) | |||
How to Fit a Toilet Seat and Lid
Step-by-Step Guide: Installing a Toilet Seat and Lid
Fitting a toilet seat and lid may seem like a daunting task, but it's actually a relatively simple process that can be completed in just a few steps. Here's a step-by-step guide to help you fit a toilet seat and lid:
Step 1: Gather Your Tools and Materials
Before you begin, make sure you have all the necessary tools and materials. You'll need a screwdriver, pliers, a measuring tape, and a new toilet seat and lid. Make sure the new seat and lid are the correct size and shape for your toilet bowl.
Step 2: Remove the Old Seat and Lid
To remove the old seat and lid, locate the two bolts at the back of the toilet bowl that attach the seat to the bowl. Use a screwdriver to unscrew the bolts, and then lift the old seat and lid off the bowl. If the bolts are rusted or difficult to remove, you may need to use pliers to loosen them.
Step 3: Clean the Toilet Bowl
Once you've removed the old seat and lid, take the opportunity to clean the toilet bowl thoroughly. Use a disinfectant cleaner and a scrub brush to remove any dirt, grime, or stains.
Step 4: Measure and Align the New Seat and Lid
Before you attach the new seat and lid, measure the distance between the two bolt holes on the toilet bowl. Then, align the new seat and lid over the bowl, making sure the bolt holes on the seat line up with the holes on the bowl. If necessary, adjust the position of the seat to ensure it's centered over the bowl.
Step 5: Attach the New Seat and Lid
Once the new seat and lid are aligned, insert the bolts into the holes on the bowl and through the holes on the seat. Tighten the bolts by hand, and then use a screwdriver to tighten them further. Be careful not to overtighten the bolts, as this can crack the toilet bowl.
Step 6: Test the Seat and Lid
Once the new seat and lid are securely attached, test them to make sure they're functioning properly. Sit on the seat and lid and make sure they're stable and secure. If necessary, adjust the bolts to ensure a tighter fit.
And that's it! With these simple steps, you can easily fit a new toilet seat and lid and give your bathroom a fresh new look.
