Rather have a pro do it for you?
| Tools and Supplies to Replace a Toilet Tank | ||||
|---|---|---|---|---|
| 1 | Adjustable wrench | |||
| 2 | Screwdriver (flathead and Phillips) | |||
| 3 | Putty knife | |||
| 4 | Towels or rags | |||
| 5 | Bucket or container | |||
| 6 | Rubber gloves | |||
| 7 | Wax ring | |||
| 8 | New toilet tank (if replacing the entire tank) | |||
How to Replace a Toilet Tank
Step-by-Step Guide: Replacing Your Toilet Tank Made Easy
Replacing a toilet tank may seem like a daunting task, but with the right tools and a little bit of know-how, it can be done in just a few easy steps. Here's how to replace a toilet tank:
Step 1: Turn off the water supply
Before you begin, turn off the water supply to the toilet. You can usually find the valve behind or near the toilet. Turn it clockwise to shut off the water.
Step 2: Remove the old tank
To remove the old tank, start by unscrewing the nuts that hold the tank to the bowl. There are usually two nuts, one on each side of the tank. Use a wrench to loosen the nuts, then lift the tank off the bowl.
Step 3: Install the new tank
Place the new tank onto the bowl, making sure the holes in the tank align with the holes in the bowl. Insert the bolts into the holes and tighten the nuts on each side of the tank.
Step 4: Attach the water supply line
Attach the water supply line to the bottom of the tank. Use an adjustable wrench to tighten the nut onto the fill valve.
Step 5: Turn on the water supply
Turn the water supply back on by turning the valve counterclockwise. Check for leaks around the water supply line and around the base of the tank.
Step 6: Test the toilet
Flush the toilet a few times to make sure everything is working properly. Check for leaks and make any necessary adjustments.
Replacing a toilet tank is a fairly simple process that can be done in just a few steps. With a little bit of patience and the right tools, you can have your new toilet tank installed in no time.
