Rather have a pro do it for you?
| Tools and Supplies to Adjust a Toilet Float | ||||
|---|---|---|---|---|
| 1 | Adjustable wrench | |||
| 2 | Screwdriver (flathead or Phillips) | |||
| 3 | Pliers | |||
| 4 | Bucket or container | |||
| 5 | Towel or rag (for cleanup) | |||
How to Adjust a Toilet Float
Easy Steps to Adjust Your Toilet Float for a Better Flush
Adjusting a toilet float is a simple task that can help you save water and money on your water bill. Here's a step-by-step guide on how to adjust a toilet float:
Step 1: Turn off the water supply
Before you start adjusting the toilet float, you need to turn off the water supply to the toilet. Locate the shut-off valve near the base of the toilet and turn it off by turning the valve handle clockwise.
Step 2: Remove the tank lid
Next, remove the tank lid by lifting it off the tank. Set it aside in a safe place where it won't get damaged.
Step 3: Locate the toilet float
The toilet float is a plastic or metal ball or cylinder that is attached to a rod or arm that is connected to the fill valve. The fill valve is the mechanism that refills the tank with water after you flush.
Step 4: Adjust the toilet float
To adjust the toilet float, look for a screw or clip that holds the float in place. Loosen the screw or clip and move the float up or down to adjust the water level in the tank. If you want to decrease the water level, move the float down. If you want to increase the water level, move the float up.
Step 5: Test the water level
After adjusting the toilet float, turn the water supply back on and let the tank fill with water. Check the water level in the tank to make sure it's at the level you want. If it's too high or too low, adjust the float again.
Step 6: Tighten the screw or clip
Once you're satisfied with the water level, tighten the screw or clip that holds the float in place. Make sure it's tight enough to hold the float in place but not so tight that you can't adjust it later if needed.
Step 7: Replace the tank lid
Finally, replace the tank lid and turn the water supply back on. Flush the toilet to make sure everything is working properly.
By following these simple steps, you can easily adjust the toilet float and save water and money on your water bill.
