Rather have a pro do it for you?
| Tools and Supplies to Fix a Toilet Handle | ||||
|---|---|---|---|---|
| 1 | Adjustable wrench | |||
| 2 | Screwdriver (either Phillips or flathead, depending on the type of screw) | |||
| 3 | Replacement toilet handle | |||
| 4 | Locking pliers (optional, for stubborn nuts or bolts) | |||
| 5 | Towel or rag (to protect the toilet's finish) | |||
How to Fix a Toilet Handle
Learn How to Easily Fix a Loose or Broken Toilet Handle
If your toilet handle is not working properly, it can be frustrating and inconvenient. However, fixing a toilet handle is a relatively simple task that you can do on your own without calling a plumber. In this step-by-step guide, we will show you how to fix a toilet handle.
Step 1: Turn off the Water Supply
Before you start fixing the toilet handle, you need to turn off the water supply to the toilet. Locate the water valve behind the toilet and turn it clockwise until it stops.
Step 2: Remove the Tank Lid
Next, remove the tank lid by lifting it off and setting it aside. Be careful not to drop it or damage it.
Step 3: Remove the Old Handle
Locate the handle inside the tank and remove it by unscrewing the nut that holds it in place. You may need a wrench to loosen the nut if it is tight. Once the nut is removed, pull the old handle out of the tank.
Step 4: Install the New Handle
Take the new handle and insert it into the hole where the old handle was located. Make sure the handle is positioned correctly and facing the right direction. Secure the handle in place by screwing the nut back on and tightening it with a wrench.
Step 5: Adjust the Chain
The chain that connects the handle to the flapper valve may need to be adjusted. The chain should be long enough to allow the flapper to close completely but not so long that it gets tangled or caught. Adjust the chain by moving the clip up or down until it is the right length.
Step 6: Test the Handle
Turn the water supply back on and test the new handle by flushing the toilet. Make sure the handle is working properly and that the toilet is flushing correctly.
Step 7: Replace the Tank Lid
Once you have confirmed that the handle is working properly, replace the tank lid by carefully setting it back on top of the tank.
In conclusion, fixing a toilet handle is a simple task that you can do on your own. By following these easy steps, you can save money and avoid calling a plumber. Remember to turn off the water supply before you start, and test the handle after you have installed the new one.
