Rather have a pro do it for you?
| Tools and Supplies to Install a Toilet | ||||
|---|---|---|---|---|
| 1 | Toilet | |||
| 2 | Wax ring | |||
| 3 | Closet bolts | |||
| 4 | Adjustable wrench | |||
| 5 | Screwdriver | |||
| 6 | Putty knife | |||
| 7 | Level | |||
| 8 | Caulk gun | |||
| 9 | Silicone caulk | |||
| 10 | Bucket or container for water. | |||
How to Install a Toilet
Step-by-Step Guide: Installing a Toilet Made Easy!
Installing a toilet may seem like a daunting task, but with the right tools and a little bit of patience, it can be done easily. Here’s a step-by-step guide on how to install a toilet:
Step 1: Gather the necessary tools and materials
Before you begin, make sure you have all the necessary tools and materials. You will need a new toilet, a wax ring, bolts, a wrench, a screwdriver, a putty knife, and a level.
Step 2: Remove the old toilet
Turn off the water supply valve, which is usually located behind the toilet. Flush the toilet to remove as much water as possible. Use a putty knife to remove the old wax ring from the flange and the bottom of the toilet. Remove the bolts securing the toilet to the floor and lift the toilet off the flange.
Step 3: Install the flange
Inspect the flange to make sure it’s in good condition. If it’s damaged, replace it before installing the new toilet. Install the new wax ring onto the flange, making sure it’s centered.
Step 4: Install the new toilet
Carefully lower the new toilet onto the flange, making sure the bolts pass through the holes on the base of the toilet. Use a level to make sure the toilet is level in both directions. Tighten the nuts on the bolts, but don’t overtighten them, as this could crack the toilet.
Step 5: Connect the water supply
Connect the water supply line to the toilet tank. Turn on the water supply valve and let the tank fill with water. Check for any leaks around the water supply line and the base of the toilet.
Step 6: Test the toilet
Flush the toilet a few times to make sure it’s working properly. Check again for any leaks around the base of the toilet.
Congratulations! You’ve successfully installed a new toilet. With these simple steps, you can save money on a plumber and have a new toilet in no time.
