Rather have a pro do it for you?
| Tools and Supplies to Clean a Toilet Brush | ||||
|---|---|---|---|---|
| 1 | Toilet brush | |||
| 2 | Rubber gloves | |||
| 3 | Bucket or sink | |||
| 4 | Dish soap or bleach | |||
| 5 | Vinegar or baking soda | |||
| 6 | Scrub brush or sponge | |||
| 7 | Towels or paper towels | |||
How to Clean a Toilet Brush
Effortless Ways to Keep Your Toilet Brush Clean and Germ-Free
Cleaning a toilet brush may not be the most glamorous task, but it is an important one that should not be overlooked. A dirty toilet brush can spread germs and bacteria, so it is essential to clean it regularly. In this step-by-step guide, we will show you how to clean a toilet brush effectively.
Step 1: Gather Your Supplies
Before you begin, you will need some supplies. These include rubber gloves, a bucket, bleach or disinfectant, and a scrub brush. You may also want to have some paper towels or a clean cloth on hand.
Step 2: Put on Your Gloves
Toilet brushes can be pretty gross, so it's a good idea to wear rubber gloves to protect your hands from any germs or bacteria.
Step 3: Remove the Brush from the Holder
Take the toilet brush out of its holder and place it in the bucket. Be careful not to drip any dirty water on the floor as you do this.
Step 4: Add Cleaning Solution
Add some bleach or disinfectant to the bucket. You can also use vinegar if you prefer a natural cleaning solution. Make sure the brush is completely submerged in the solution.
Step 5: Scrub the Brush
Using a scrub brush, scrub the toilet brush thoroughly. Pay special attention to the bristles and the base of the brush, as these are the areas that are most likely to harbor germs and bacteria.
Step 6: Rinse the Brush
Once you have finished scrubbing, rinse the brush thoroughly with clean water. Make sure all the cleaning solution is removed.
Step 7: Dry the Brush
Shake off any excess water from the brush and then place it in a well-ventilated area to dry. You can also use a clean cloth or paper towels to dry the brush if you prefer.
Step 8: Clean the Holder
While the brush is drying, take the opportunity to clean the holder. Use a disinfectant spray or wipes to clean the holder thoroughly, paying special attention to any hard-to-reach areas.
Step 9: Reassemble
Once the brush and holder are both clean and dry, reassemble them and put the brush back in its holder.
Congratulations, you have successfully cleaned your toilet brush! By following these steps regularly, you can keep your toilet brush clean and free from germs and bacteria.
